your chair may have scratches, and marks, this product may save refinishing
As chair
re-seaters, before the weaving is started, we should clean up the chair.
Once the new seat
is woven, this will remove all the small rub marks and nicks
we sometimes make.
For
the 1/2 pint kit:
A 8oz can of howard's
restor-a
finish, 8oz of Feed-N-Wax, 4oz of Orange Oil,
2ea #0000 steel wool pads,
plus a cloth pad,
PLUS - our special book with how to information
and tips to help you.
All you will need to restore a piece of furniture!
(This will do many chairs.)
For
the pint kit:
A 16oz can of Howard's
Restor-a Finish, 8oz of Feed-N-Wax, 8oz of Orange Oil,
4ea #0000 steel
wool pads, plus two cloth pads
PLUS - our
special book with how to information
and tips to help you.
All you will need to restore several pieces of furniture!
you will need: a chair or a piece of wooden furniture
Howards Restor-A-Finish
works best when applied with a small pad of steel wool or toweling. DO NOT pour
directly on the finish. When using steel wool, always rub with the grain of the
wood. First, determine the pressure you should use on an inconspicuous spot, as the
hardness of finishes vary.
works best when applied with a small pad of steel wool or toweling. DO NOT pour
directly on the finish. When using steel wool, always rub with the grain of the
wood. First, determine the pressure you should use on an inconspicuous spot, as the
hardness of finishes vary.
Restores color and luster to faded finishes.
Restor A Finish Kit 
